VCI vapor phase anti-rust film is suitable for different parts of various industries. It has a short customization cycle, fast delivery, and convenient use.
At the same time, in order to achieve a better anti-rust effect and anti-rust cycle, the following is the use method of VCI anti-rust film, I hope it will be convenient for you to achieve better user satisfaction.
1. How to use:
1. Before packaging, please ensure that the packaging items are clean. In the process of handling and packing metal objects, packers wear gloves.
2. Pack the metal parts that need anti-rust protection in a vapor phase anti-rust plastic film, then heat weld and seal.
3. The packaging should avoid direct sunlight as much as possible to prevent premature volatilization of VCI.
4. Avoid high temperature and humidity when packaging, because the VCI anti-rust film needs to be supported at room temperature to delay rust, and it cannot prevent rust that has occurred.
The anti-rust film has good gas phase and contact anti-rust performance, good anti-rust effect and high cost performance.
2. Matters needing attention:
1. Select the corresponding VCI anti-rust film when anti-rusting different parts to meet different metal anti-rust and corrosion requirements.
2. Hot metal should be packaged after cooling.
3. During anti-rust packaging operations, the workplace should be far away from “acids, alkalis, and other highly corrosive substances and corrosive gases”.
4. If the film is accidentally punctured by complicated metal packaging, use industrial tape to seal it.
5. VCI material can be used together with desiccant.
6. After the purchase of anti-rust materials, the inventory of anti-rust film should not exceed 6 months.
7. The vapor phase corrosion inhibitor is stored in an environment where the relative humidity is not greater than 75%, and the environmental humidity when the finished product is packaged cannot exceed 75%.
