VCI vapor phase anti-rust film is suitable for different parts of various industries. It has a short customization cycle, fast delivery, and convenient use.

At the same time, in order to achieve a better anti-rust effect and anti-rust cycle, the following is the use method of VCI anti-rust film, I hope it will be convenient for you to achieve better user satisfaction.

1. How to use:

  • 1. Before packaging, please ensure that the packaging items are clean. In the process of handling and packing metal objects, packers wear gloves.

  • 2. Pack the metal parts that need anti-rust protection in a vapor phase anti-rust plastic film, then heat weld and seal.

  • 3. The packaging should avoid direct sunlight as much as possible to prevent premature volatilization of VCI.

  • 4. Avoid high temperature and humidity when packaging, because the VCI anti-rust film needs to be supported at room temperature to delay rust, and it cannot prevent rust that has occurred.

Anti-rust film

The anti-rust film has good gas phase and contact anti-rust performance, good anti-rust effect and high cost performance.

2. Matters needing attention:

  • 1. Select the corresponding VCI anti-rust film when anti-rusting different parts to meet different metal anti-rust and corrosion requirements.

  • 2. Hot metal should be packaged after cooling.

  • 3. During anti-rust packaging operations, the workplace should be far away from “acids, alkalis, and other highly corrosive substances and corrosive gases”.

  • 4. If the film is accidentally punctured by complicated metal packaging, use industrial tape to seal it.

  • 5. VCI material can be used together with desiccant.

  • 6. After the purchase of anti-rust materials, the inventory of anti-rust film should not exceed 6 months.

  • 7. The vapor phase corrosion inhibitor is stored in an environment where the relative humidity is not greater than 75%, and the environmental humidity when the finished product is packaged cannot exceed 75%.